PVC预制塑胶球场
Factory-made PVC Court Plastic Floor Vinilpave

Vinilpave结构图说明 Section Graph：
1.透明TPU加膜层 TPU Film
2.PVC耐磨层 PVC Plastic Layer for Wearing
3.网格加强层 Polyester Net
4.PVC层 PVC Layer
5 闭 口发泡层 Tensi le Foam Layer

Vinilpave PVC预制塑胶球场是一种广泛用于多种室内运动场地的材料，可用于室内羽毛球场，排球场，乒乓球场，篮球场，网球场和手球场等体育休闲场馆。具有良好的减震性，脚感舒适性，耐磨性。外观漂亮；易于清洁；易于安装。

Made in factory,PVC Court Plastic Floor is a kind of materials popularly used in  varieties of indoor althletic courts such as  badminton, vallyball, tabletennis, basketball, tennisand handball.It characters qualities including shock-absorbing,  comfortable and durable. Easily cleant,easily installed. 

 

 

使用环境
1 室内用 2 室外用

常用厚度
1 3.5mm 2 4.5mm
其他厚度可以定制

表面花纹
1绿荔枝纹 红荔枝纹


2绿沙地纹3红牛皮纹


4木地板纹
其他颜色可以定制

本公司生产的Vinipave均采用TPU加膜，耐磨性更强，寿命达八年以上。

 

1 验收水泥基础，施工一层3-5mm水泥自流平材料，找平地面。达到3米直尺下偏差在3 mm之内。
2 养护时间到后，清除表面水泥渣和不平处。
3 弹线定位。
4 将宝时杰专用胶水用镘刀刮在位置上。待其变透明状，开始铺Vinilpave.
5 滩开卷材，检查有无质量问题。
6 将Vinilpave铺贴在刮有胶水的地方，尽量靠紧缝到3mm范围内。
7 用纸筒压实Vinilpave胶面,排除下面的空气。
8 用热风焊枪将缝焊接一起。
9 用优盾特制白色画线漆画线。
1 Smoothen the surface to be work on by applying a coat of 3-5mm self-levelling
cement product. Or construct a smooth surface with other material but cement.
The neglect deviation is below 3mm under a 3 metre straight ruler. 
2 Clear the cement surface after curing-time is over
3 Sign the position for lay PVC mat according to the size of PVC mat.
4 Scrape the adhesivs on the position with trowels.The adhesive will turn to  the
transparent glue after ten minutes.It is time to lay down PVC mat.
5 Check the quality of every roll.Do not apply any bad quality roll if there is.
6 Spread the roll on the position on which is troweled with the glue,try to leave less than
a minometre of seam between two mats.
7 Press mat with paper roll to adhesive closely and push out air between two layers
8 Weld the seam by hot gun after curing thoroughly
9 Lining.        

 

内容 4