LATICPAVE 底涂使用方法 Usage
1、LATICPAVE底涂的配制是按以下比例加入到少325标号水泥和60-120目石英沙:底涂:石英沙:水泥:水=15加仑:50-75kg:25kg:15加仑 按上述顺序边加边搅，直至搅匀。
2、配置好的底料用1米的胶耙刮到场地上。约2小时表干，气温低时需更长的时间。
Mix it with 60-120mesh silicone sand and 325# portland cement according to ratio below:
Resurfacer: siliconesand: cement: portable water = 15cal:50-75kg:25kg:15cal
Add materials with sequence above
Apply the mixage with 1metre squilgee on base,Surface dry needs 2 hours.
Warranty
1 Do not apply them when it showereing in an hour.
2 When it applied on concrete base, please enquiry to technical department of supplier with no hesitance.
3 When it will be applied as finishing or texture of cushion court, you'd better inform to supplier
LATICPAVE 彩色涂料的使用方法 Usage
1、LATICPAVE 彩色涂料的配制是按以下比例加入60-120目石英沙作为纹理层用料：彩色面涂:石英沙:水=15加仑:50-75kg:12-15加仑按上述顺序边加边搅，直至搅匀。
2、配置好的料用1米的胶耙刮到场地上。约2小时表干，气温低时需更长的时间。
3、面涂层不用或少加石英沙，配料比例 彩色面涂:石英沙:水=15加仑:50-75kg:12-15加仑 按上述顺序边加边搅拌,直至搅匀.气温低时需更长的时间。
注意事项Warranty
1 不要在一小时内会下雨时施工
2 水泥基础处理请咨询本公司技术部门
3 如果用于软垫弹性面层，应购买本公司适应弹性基础的彩色面涂
Mix as texture layer with 60-120 mesh silicone sand according to ratio below：Color coating:silicone sand:portable water=15cal:50-75kg:15cal Add materials in sequence above
As finish layer there is not any sand or few to add in when mix it.
Apply the mixage with 1 metre squilgee on base,Surface dry needs 2 hours.
1 Do not apply them when it showering in an hour.
2 When it applied on concrete base,please enqury on technical department of supplier with no hesitate.
3 When it will be applied as finishing or texture of cushion coatings,you'd better inform to supplier
广州金力美建材实业有限公司
版权所有，抄袭必究
Tel:020-82581086 Fax:020-82037502
工信部备案/许可证号：粤ICP备17021946号